User guide

nForce 790i Ultra SLI Motherboard
EVGA Corporation
56 January 11, 2008 | DU-03751-001_v01
 nForce SPP
This function defines the core voltage level for the NVIDIA nForce SPP
chip. Use the
Page Up and Page Down keys to select a voltage (1.20V,
1.30V, 1.40V, 1.50V) or select
[Auto]to automatically set the voltage.
 nForce MCP
This function defines the core voltage level for the NVIDIA nForce
MCP chip. Use the
Page Up and Page Down keys to select a voltage or
select
[Auto]to automatically set the voltage.
 HT nForce SPP <-> MCP
This function defines the voltage level for the NVIDIA HT nForce SPP
<-> MCP Link. Use the
Page Up and Page Down keys to select a
voltage or select
[Auto]to automatically set the voltage.
 nForce MCP Auxiliary
This function defines the core voltage level for the NVIDIA nForce
MCP Auxiliary voltage. Use the
Page Up and Page Down keys to select a
voltage or select
[Auto]to automatically set the voltage.
 GTLVREF Lane 0
This function defines the voltage level for GTLVREF Lane 0. Use the
Page Up and Page Down keys to select a voltage or select [Auto]to
automatically set the voltage.
 GTLVREF Lane 1
This function defines the voltage level for GTLVREF Lane 1. Use the
Page Up and Page Down keys to select a voltage or select [Auto]to
automatically set the voltage.
 GTLVREF Lane 2
This function defines the voltage level for GTLVREF Lane 2. Use the
Page Up and Page Down keys to select a voltage or select [Auto]to
automatically set the voltage.
 GTLVREF Lane 3
This function defines the voltage level for GTLVREF Lane 3. Use the
Page Up and Page Down keys to select a voltage or select [Auto]to
automatically set the voltage.