User guide

Configuring the BIOS
EVGA Corporation
January 11, 2008 | DU-03751-001_v01 31
 PnP/PCI Configurations
Use this menu to modify the system’s Plug-and-Play and PCI
configurations.
 System Monitor
Use this menu to monitor the real-time system status of your PC,
including temperature, voltages, and fan speed.
The following items on the CMOS Setup Utility main menu are
commands rather than submenus:
 Load Defaults
Load default system settings.
 Set Password
Use this command to set, change, and disable the password used to access
the BIOS menu.
 Save & Exit Setup
Use this command to save settings to CMOS and exit setup.
 Exit Without Saving
Use this command to abandon all setting changes and exit setup.
SLI-Ready Memory is a status indicator displayed at the bottom of the
BIOS screen. The three status indicators are:
 Enabled: SLI-Ready memory is detected and enabled.
 Disabled: SLI-Ready memory is detected but disabled.
 Not Detected: SLI-Ready memory is not detected.