Specifications

 MEM (DDR), MHz
Use the + or – keys to scroll through new values for the memory frequency or
type in a new value. Note that the Actual MEM (DDR) reflects the actual
frequency that takes effect when the system reboots.
 Memory Timing Setting
Press Enter to display the Memory Timing Setting menu. Use this menu to set
optimal timings or to manually enter timings.
 Optimal
Use the Page Up and Page Down keys to select Optimal. Optimal
prohibits you from manually setting any timing. All timing is set for optimal
performance.
 :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Parameters Settings Current Value
Memory Timing Setting [Optimal]
x tCL (CAS Latency) Auto(7) 7
x tRCD Auto(7) 7
x tRP Auto(7) 7
x tRAS Auto(20) 20
x Command Per Clock (CMD) Auto(1T) 1T
** Advanced Memory Settings **
x tRRD Auto(4) 4
x tRC Auto(27) 27
x tWR Auto(10) 10
x tWTR Auto(14) 14
x tFAW Auto(21) 21
x tREF Auto 7.8uS
x tRFC Auto 110ns
Item Help
Main Level 
Select [Expert] to
enter timings manually
Phoenix – AwardBIOS CMOS Setup Utility
Memory Timing Setting