Specifications

When you select one of the CPUOC x% options, the FSB - Memory Clock
Mode is set to Unlinked and cannot be changed until EPP 2.0 Memory is
set to Disable.
 FSB and Memory Clock Mode
Use the Page Up and Page Down keys to scroll through the FSB and Memory
Clock Mode options. The options are:
 Auto
This is the optimal setting since it sets the FSB and memory speeds
automatically.
 Linked
When Link is selected, FSB-Memory Ratio and FSB (QDR), MHz are
changed to editable and the FSB speed can be entered manually. As the FSB
speed is changed, CPU Freq, MHz changes proportionally.
 Unlinked
When Unlink is selected, FSB (QDR), MHz and MEM (DDR), MHz are
changed to editable and the FSB and memory speeds can be entered
manually. As the FSB speed is changed, CPU Freq, MHz changes
proportionally.
 FSB (QDR), MHz
Use the + or – keys to scroll through new values for the CPU FSB frequency
or type in a new value. Note that the Actual FSB (QDR) reflects the actual
frequency that takes effect on a reboot.
FSB – Memory Clock Mode [Unlinked]
x FSB – Memory Ratio Auto
FSB (QDR), MHz [1067] 1066.7
Actual FSB (QDR), MHz 1066.7
MEM (DDR), MHz [1067] 800.6
Actual MEM (DDR), MHz 800.0
CPU Freq, MHz 2933.3 2933.3
CPU Multiplier 11X 11X
FSB – Memory Clock Mode [Linked]
FSB – Memory Ratio [Auto]
FSB (QDR), MHz [1067] 1066.7
Actual FSB (QDR), MHz 1066.7
x MEM (DDR), MHz Auto 800.6
Actual MEM (DDR), MHz 800.0