Specifications

Select FSB & Memory Config from the Frequency/Voltage Control menu and
press Enter to display the FSB & Memory Config menu. This menu provides the
means to set SLI-Ready memory, FSB memory, and memory timing.
Figure 15. FSB & Memory Config Menu
 EPP 2.0 Memory
Use the Page Up and Page Down keys to scroll through the EPP 2.0 Memory
options. The options are:
 Disabled
 CPUOC 0%
 CPUOC 1%
 CPUOC 2%
 CPUOC 3%
 CPUOC 4%
 CPUOC 5%
 Auto
 Expert
 :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Parameters Settings Current Value
EPP 2.0 Memory [Disabled] Disabled
CPU Freq, MHz 2933.3 2933.3
CPU Multiplier 11X 11X
FSB – Memory Clock Mode [Auto]
x FSB – menory Ratio Auto
x FSB (QDR), MHz Auto 1066.7
Actual FSB (QDR), MHz 1066.7
x MEM (DDR), MHz Auto 800.6
Actual MEM (DDR), MHz 800.0
 Memory Timing Setting [Press Enter]
Item Help
Main Level 
“Auto” realizes the
complete optimized
memory settings when
EPP 2.0 memory is
installed
Optimized memory
settings by allowing
X% CPU overclocking
CPU overclocking may
require manual
overvoltaging of the
CPU to improve system
stability
Phoenix – AwardBIOS CMOS Setup Utility
FSB & Memory Config