Specifications

This function on the PnP/PCI Configuration menu allows you to define if the
BIOS can automatically configure all the boot and plug-and-play compatible
devices or if you can manually select IRQ, DMA, and memory base address fields.
Select [Auto(ESCD)] if you want the BIOS to automatically populate these
fields. If you select [Manual] so you can assign the resources, IRQ Resources
is enabled for input.
To enable this field for input, set Resources Controlled By to [Manual].
With this field enabled, press Enter to see options.
Use Legacy ISA for devices compliant with the original PC AT Bus specification.
Use PCI/ISA PnP for devices compliant with the plug-and-play standard, whether
designed for PCI or ISA Bus architecture.
This item is designed to overcome problems that may be caused by some
nonstandard VGA cards..
IRQ-5 assigned to [PCI Device]
IRQ-9 assigned to [Reserved]
IRQ-10 assigned to [PCI Device]
IRQ-11 assigned to [PCI Device]
IRQ-14 assigned to [PCI Device]
IRQ-15 assigned to [PCI Device]
Resources Controlled By [Manual)]
IRQ Resources [Press Enter]
Resources Controlled By [Auto(ESCD)]
x IRQ Resources Press Enter