Specifications

This function on the Power Management Setup menu allows you to set Soft-Off
by PBNT to [Instant-Off] or [Delay 4 Sec].
This function on the Power Management Setup menu allows you to enable or
disable WOL(PMW#) from soft-off.
This function on the Power Management Setup menu allows you to enable or
disable WOR(RI#) from soft-off.
 This function enables your computer to automatically restart or return to its
last operating status after power returns from a power failure.
 Off: The system stays off after a power failure.
 On: The system stays on after a power failure
This function on the Power Management Setup menu allows you to enable or
disable the Power-on by alarm function. Set to [Disable] to prevent power-on
by alarm. When set to [Enable], you can manually put in the day of the month
and the time of the alarm.
To enter a day or time, use the Page Up and Page Down keys to scroll through
numbers or enter the number using the keyboard number or the + and – keys.
Power-on by Alarm [Disabled]
Day of Month Alarm [ 0]
Time (hh:mm:ss) Alarm [0 : 0 : 0]