Specifications

RAID Enable [Disabled]
x SATA 1 (A0) RAID Disabled
x SATA 2 (A1) RAID Disabled
x SATA 3 (B0) RAID Disabled
x SATA 4 (B1) RAID Disabled
x SATA 5 (C0) RAID Disabled
x SATA 6 (C1) RAID Disabled
OnChip USB [Disabled]
x USB Keyboard Support Enabled
x USB Mouse Support Enabled
 IDE HDD Block Mode
Using this function on the Integrated Peripherals menu allows your IDE hard
drive needs to support block mode. Select [Enabled] to automatically detect
the optimal number of block read/writes per sector the drive can support.
Select [Disabled] if your drive does not support block mode.
Press Enter to display the RAID Config menu.
 RAID Enable
Use this function to enable or
disable RAID. When RAID is
set to [Disabled], all SATA
functions are changed to
Disabled and cannot be
changed.
 SATA x Primary/Secondary When RAID Enable is set to [Enabled],
you can enable or disable the various SATA functions.
Press Enter to display the USB Config menu.
 OnChip USB
Use this function to enable specific versions of the USB or disable the onchip
USB. When the onchip USB is set to [Disabled], the keyboard and mouse
support functions are set to
V1.1+V2.0 and cannot be
changed. Versions that can
be selected are [V1.1+V2.0] or [V1.1].
OnChip USB [V1.1+V2.0]
USB Keyboard Support [Enabled]
USB Mouse Support [Enabled]
RAID Enable [Enabled]
SATA 1 (A0) RAID [Disabled]
SATA 2 (A1) RAID [Disabled]
SATA 3 (B0) RAID [Disabled]
SATA 4 (B1) RAID [Disabled]
SATA 5 (C0) RAID [Disabled]
SATA 6 (C1) RAID [Disabled]