Specifications

Using the arrow keys, position the cursor over the month, day, and year. Use the
Page Up and Page Down keys to scroll through dates and times. Note that the
weekday (Sun through Sat) cannot be changed. This field changes to correspond
to the date you enter. Note that the hour value is shown in a
24-hour clock format. Time is represented as hour : minute : second.
Use these functions to detect and configure the individual IDE and SATA
channels. Select a channel and press Enter to display the IDE/SATA sub-menu.
IDE Auto-Detect [Press Enter]
Extended IDE Drive [None}
Access Mode Auto
Capacity 0 MB
Cylinder 0
Head 0
Precomp 0
Landing Zone 0
Sector 0
 IDE Channel 0 Master [None]
 IDE Channel 0 Slave [None]
 SATA 1 (A0) [None]
 SATA 2 (A1) [None]
 SATA 3 (B0) [None]
 SATA 4 (B1) [None]
 SATA 5 (C0) [None]
 SATA 6 (C1) [None]
Date (mm:dd:yy) Sat, Jul 01 2006
Time (hh:mm:ss) 14 : 48: 43
Press ENTER to display
IDE Channel sub-menu
IDE HDD Auto-Detect [Press Enter]
IDE Channel 0 Slave [Manual}
Access Mode [CHS]
Capacity 0 MB
Cylinder [ 0]
Head [ 0]
Precomp [ 0]
Landing Zone [ 0]
Sector [ 0]
Press ENTER to display
SATA Channel sub-menu