Specifications

The BIOS is the communication bridge between hardware and software. Correctly
setting the BIOS parameters is critical to maintain optimal system performance.
Use the following procedure to verify/change BIOS settings.
Power on the computer.
Press the Del key when the following message briefly displays at the bottom
of the screen during the Power On Self Test (POST).
Press F1 to continue, DEL to enter Setup.
Pressing Del takes you to the Phoenix-Award BIOS CMOS Setup Utility.
It is strongly recommended that you do not change the default BIOS settings. Changing
some settings could damage your computer.
The main menu allows you to select from the list of setup functions and two exit
choices. Use the Page Up and Page Down keys to scroll through the options or
press Enter to display the associated submenu. Use the  arrow keys to position
the selector in the option you choose. To go back to the previous menu, press Esc.
Note that on the BIOS screens all data in white is for information only, data in yellow is
changeable, data in blue is non-changeable, and data in a
red box is highlighted for selection.