Specifications

These onboard buttons include RESET, POWER and Clear CMOS. Easily turn
on/off the system, and conveniently clear the CMOS.
The motherboard uses the CMOS ROM to store all the set parameters in the bios.
The CMOS can be cleared by using the following procedure:
Turn off the AC power supply.
Press and hold the clear CMOS button for 10 seconds.
Turn the AC power supply back on.
These onboard buttons turn the system on/off easily and is especially handy for
debugging or testing the system.
The POWER button with LED indicates the system’s status. When the system is
powered on status, the LED is green. When the system is in Standby mode, the
LED is yellow.
The RESET button with LED indicates the activity status of the hard disks. The
LED is orange.
Clear CMOS
Button
RESET
Button
POWER
Button