Specifications

1 - Floppy Cable
Used to attach a floppy drive to the motherboard.
3 - 2-Port SATA Power Cables
Allows a Molex power connector to adapt to a
SATA power connector.
1 - IEEE 1394a (Firewire) Cable
Provides one additional IEEE1394 ports the back
panel of the chassis.
1 - USB 2.0 4-Port Cable
Provides four additional USB ports to the back
panel of the chassis.
6 - SATA Signal Cables
Used to support the Serial ATA protocol and each
one connects a single drive to the motherboard
1 - Serial Port (Comm2) Cable
Used for serial based legacy devices
1 - IDE-ATA 133 HDD Cable
Passes data between the IDE connection on the
motherboard and IDE device.
1 - 2-Way SLI Bridge
Allows for a 2-Way SLI set up with compatible
NVIDA GeForce Graphics Cards
1 - 3-Way SLI Bridge
Allows for a 3-Way SLI set up with compatible
NVIDA GeForce Graphics Cards
The EVGA nForce 790i SLI FTW motherboard with the NVIDIA nForce 790i
SLI SPP and MCP processors is a PCI Express, SLI-ready motherboard. Figure 1
shows the motherboard and Figures 2 shows the back panel connectors.