User guide

EVGA Classified SR-X Motherboard

I/O Shield

Installs in the system case to block radio frequency

transmissions, protect internal components from dust, foreign

objects, and aids in proper airflow within the chassis.

3 - 2-Port SATA Power Cables

Allows a Molex power connector to adapt to a SATA power

connector.

1 - 4-Port USB 2.0 Bracket

Provides four (4) additional USB 2.0 ports on the rear of the

case.

1 - 2-Port USB 3.0 Bracket

Provides two (2) additional USB 3.0 ports on the rear of the

case.

6 - SATA Data Cables

Used to support the Serial ATA protocol and each one connects

to a single port on the motherboard.

1 - 2-Way SLI® Bridge

Bridges two (2) graphic cards together which allows for

2-Way SLI

1 – 3-Way SLI® Bridge

Bridges three (3) graphic cards together which allows for 3-Way

SLI

1 – 4-Way SLI® Bridge

Bridges four (4) graphic cards together which allows for 4-Way

SLI

. (on select card models)

1 - Installation CD

Contains drivers and software needed to setup the

motherboard.