User guide

EVGA Classified SR-X Motherboard

Connecting Cables and Setting

Switches

This section takes you through all the connections and switch settings on the

motherboard. This will include:

 Power Connections

 24-pin ATX power (PW1)

 8-pin ATX 12V power (PW12-P0-1, PW12-P1-1)

 Internal Headers

 Front Panel Header

 USB Headers

 Audio Header

 SATA II / SATA III

 Mini-SAS Connectors

 Chassis Fans

 USB 2.0/3.0

 Expansion slots

 CMOS Clear Button

 Switch Settings

24-pin ATX Power (PW1)

PW1 is the main power supply connector located along the edge of the board

next to the SATA ports. Make sure that the power supply cable and pins are

properly aligned with the connector on the motherboard. Firmly plug the

power supply cable into the connector and make sure it is secure.

PW1 connector

Plug power cable from system

power supply to PW1