User guide

EVGA X58 CLASSIFIED3 Motherboard

Onboard PATA/SATA Device

Press Enter to display the Onboard PATA/SATA Device menu.

 SATA Mode

This is allows you set the onboard Serial SATA mode.

 IDE: Use the SATA hard disk drivers as Parallel ATA storage devices.

 RAID: Create a RAID 0, 1, 10, 5

 AHCI: Use the AHCI (Advanced Host Controller Interface) to enables

advanced SATA features for improved performance with NCQ and

Hot-plug features

 LEGACY Mode Support

This function allows the SATA controller to operate in LEGACY mode.

Selected Disabled if you install operating system that support Native mode.

 SATA 3.0 Controller

This function allows you to enable the Marvell SATA 3.0 Controller

SATA Mode [IDE]

LEGACY Mode Support [Disabled]

SATA 3.0 Controlle [Enabled]