User manual

EVGA Z68/P67 Motherboard

This section provides the AMI POST Codes (Table 6) for the EVGA Z68/P67

Motherboard during system boot up.

The POST Codes are displayed on the Debug LED

readout located directly onboard the motherboard.

This Debug LED will also display current CPU

temperatures after the system has fully booted

into the Operating System.

Table 6. AMI POST Code

Power on. Reset type detection (soft/hard).

AP initialization before microcode loading

North Bridge initialization before microcode loading

South Bridge initialization before microcode loading

OEM initialization before microcode loading

Microcode loading

AP initialization after microcode loading

North Bridge initialization after microcode loading

South Bridge initialization after microcode loading

OEM initialization after microcode loading

Cache initialization

0C-

Reserved for future AMI SEC error codes

Microcode not found

Microcode not loaded

PEI Core is started

11-

Pre-memory CPU initialization is started

15-

Pre-memory North Bridge initialization is started

19-

Pre-memory South Bridge initialization is started

Debug LED with CPU

Temperature Monitor