Safety Information

EverWatt Lights GHS Format SDS
Preparation Date: 06/03/2014 Revision Date: 10/08/2017
Format: GHS Language: English (US) WHMIS, OSHA HCS 2012
Page 4 of 11
Section 2: Hazard Identification United States (Continued)
2.9.3. Eye Exposure:
Injury may occur if product is altered or damaged resulting in prolonged direct exposure to
the eyes of unfiltered light from LEDs.
2.9.4. Respiratory Exposure:
Inhalable dust and particulates may be generated if product is pulverized. As with any
particulate matter, respirable particles may cause mechanical irritation of the respiratory
system and/or lung injury.
2.10. NFPA Rating: Health 1 Fire 1 Instability/Reactivity 0
Section 3: Composition/Information on Ingredients
3.1. Exempt article ingredients not measured
3.2. These items are light fixtures in various sizes, configurations, and designs. All contain solid-state light emitting diodes
(LEDs) as the light-generating source. These LEDs are contained in various modules types and shapes that may be
constructed of aluminum, glass, plastic, or a combination of these materials. Some products also contain circuitry to energize
the LEDs. All lamps are fitted with a metal base or bracket for installation in various locations. These bases are generally
comprised of aluminum, magnesium, steel or a combination of these materials.
Section 4: First Aid Measures
4.1. Eyes: Not Applicable
4.2. Skin: 4.2.1. Wash with soap and water.
4.2.2. Treat lacerations using standard first aid procedures.
4.2.3. Seek medical attention.
4.3. Inhalation: Not Applicable
4.4. Call poison center if you feel unwell.
4.5. Physicians: Treat according to person’s condition and specifics of exposure.
Section 5: Fire Fighting Measures
5.1. Flash point: Not applicable/determined
5.2. Lower/Upper Explosive Limit: Not applicable/determined
5.3. Extinguishing Media: Water, CO2, and sand.
5.4. Extinguishing Media to Avoid: None