Specification Sheet

OVERVIEW
APPLICATIONS
CUL listed for wet locations
Street & roadway fixtures
Can be fully enclosed or open
Wall packs
Must be fully enclosed if installed in wet locations
High bay & low bay fixtures
Auto sensing input voltage 100-277VAC 50/60Hz
Canopy lights
Easy to install with E26, E39 screw base size
Flood lights
Old ballast must be removed before installation
APPLICABLE USE
L70 rated for over 90,000 hours
Multipurpose bulb that can be used in a wide
number of applications, please see housing
requirements for more details
L90 rated for over 25,000 hours
ABBREVIATIONS
IP
Known as ingress protection or international protection rating. The rating consists of the letters IP
followed by 2 digits, the first digit stands for the level of protection that the enclosure provides
against solid bodies, the second digit describes the degree of protection of the equipment inside
the enclosure against water.
6
Means this bulb is protected from total dust ingress
4
Means protected from water spray from any direction, limited ingress protection
CB
Corn bulb
W
Wattage
B1
Version number
X
Base size
CCT
Kelvin color temperature, can be located after the model number
SPECIFICATIONS
Product Name
EverWatt IP64 60W Opto-4 LED Corn Bulb
Part No
EW-IP64CB-060W-B1X
Light Type
Multipurpose LED retrofit bulb
Product Dimension
(E39: 11.00” x 3.60”) (E26: 10.30” x 3.60”)
Product Weight
1.38lb
Color temperatures
4000K/4500K/5000K/5700K
CRI
74-80
Lumens
7800-8700
Lumen range
The lumen output can range depending on the reflector and type of enclosure used
lm/W (lumens per Watt)
115-140
Input Power
60W
Power Factor
0.92
Beam Angle
360°
Input Voltage
100V-277V AC 50Hz/60Hz
https://everwattlights.com/ | tel: [phone] | email: [e-mail]