Material Safety Data Sheet

Section 3: Hazard Identification (Continued)
3.5. Signal Word: Not Applicable
3.6. Hazard Statement:
This article is essentially inert under most conditions including those most likely to be
present in a fire or other emergency situation.
3.7. Pictograms: Not Applicable
2.8. Precautionary Statement:
This product is an electrical device that when used in or along with appropriate equipment
designed for those products and constructed for use with such products, has no special
health or safety concerns.
3.9. Description of any hazards not otherwise classified:
3.9.1. Primary routes of particulate entry: Ingestion, Eye/Skin Contact.
3.9.2. Skin Exposure:
Minor laceration and/or abrasion may occur if product is broken, sharp objects pierce
coating and then come into contact with skin. Alteration/damage to the product can
result in exposure to additional unforeseen and unpredictable hazards including but not
limited to electrical hazards. Refer to Sections 7 and 8 for additional information
regarding Handling and Personal Protective Equipment (PPE).
3.9.3. Eye Exposure:
Injury may occur if product is altered or damaged resulting in prolonged direct
exposure to the eyes of unfiltered light from LEDs.
3.9.4. Respiratory Exposure:
Inhalable dust and particulates may be generated if product is pulverized. As with
any particulate matter, respirable particles may cause mechanical irritation of the
respiratory system and/or lung injury.
3.10. NFPA Rating: Health 1 Fire 1 Instability/Reactivity 0
Additional information regarding applications or technical specifications for this product may
be available at http://www.EverWattlights.com
EverWatt
www.EverWattlights.com Tel: [phone] Email: [e-mail]
Preparation Date: 06/03/2014 Revision Date: 03/02/2018
Format: GHS Language: English (US) WHMIS, OSHA HCS 2012