Specification Sheet

TO AVOID RISK OF FIRE, EXPLOSION, OR ELECTRIC SHOCK
● Power must be off before and during installation and/or maintenance.
● Supply voltage must be the same as the voltage rating for the luminaire.
● Fixture and bulb must be grounded.
● Bulb and fixture must be operated in the ambient temperatures above those indicated.
● All guidelines and steps in included instructions must be followed.
● Must be installed, inspected, and maintained by a certified and licensed electrical contractor only, and in
accordance with all applicable laws and electrical codes.parts.
● After installing the fixture please make sure the wiring and the fixture are properly insulated.
● Suitable for wet locations, but do not work on luminaire in inclimate weather.
TROUBLESHOOTING
Fixture not Lighting?
Check points, make sure they are properly connected
and power is on.
Flickering or Flashing?
Check connections and make sure they are properly
connected. Make sure the supply voltage is the same as
the rated fixture voltage. Turn off power for 3 minutes
and try again.
Still not working?
Please contact us at: [e-mail] Or
call us at [phone]
https://everwattlights.com/ | tel: [phone] | email: [e-mail]