User Guide

7. On the PAIR YOUR TRANSMITTER
screen the smart transmitter serial number
detected by the app is listed as “Not Connected”.
Tap Not Connected to begin the pairing
process.
8. A Bluetooth Pairing Request pop-up
appears.
Tap Pair to confirm the pairing.
9. The app displays “Connected” next to your
smart transmitter serial number once the
pairing is complete. The smart transmitter will
provide intermittent vibrations until the smart
transmitter is linked with the inserted sensor.
Tap Next.
10. The DAILY CALIBRATION screen appears
where you set your twice-daily calibration
reminder times. Tap Morning and then
Evening to change either time.
Tap Next when done.