Specification

FOODSERVICE
EV9970-42 SPECIFICATION SHEET
REPLACEMENT CARTRIDGE KIT FOR EVERPURE HIGH FLOW CSR TRIPLE-MC
2
SYSTEMS
Foodservice
Convenient replacement cartridge kit
contains all necessary cartridges to
service filters in specific High Flow CSR
Triple combination systems
Proprietary Micro-Pure
®
II filtration media
effectively inhibits the growth of bacteria
on the filter media that can decrease
product life
Kit includes: one EC210 prefilter, three MC²
filter cartridges, and one SS-IMF with spacer
MC² cartridges are NSF
®
Certified under
NSF/ANSI Standards 42 and 53. SS-IMF
cartridge is NSF component listed
Inhibits any potential bacterial growth
APPLICATIONS
FEATURES • BENEFITS
Install vertically with cartridge
hanging down
Allow 2
1
⁄2" (6.35 cm) clearance below the
cartridge for easy cartridge replacement
Flush cartridges by running water through
system for five (5) minutes at full flow
Install SS-IMF cartridge in SR-X bowl
vertically with black O-band seal up
Change cartridges on a regular six (6)
month preventative maintenance program
Change cartridges when capacity is reached
or when pressure falls below 10 psi (0.7 bar)
Change SS-10 cartridge before
Hydroblend™ compound is completely
used up
Replace EC210 cartridge when dirt has
penetrated through to the inner core of
the cartridge
Always flush the filter cartridge at time of
installation and cartridge change
Service Flow Rate: Maximum 5 gpm
(18.9 Lpm)
INSTALLATION TIPS OPERATION TIPS SIZING
Triple-MC
2
Replacement Cartridge Kit: EV9970-42
EVERPURE
®
TRIPLE-MC
2
CARTRIDGE KIT
Exclusive precoat filtration provides
superior chlorine taste and odor reduction
and micro-filters dirt and particles as small
as 0.2* micron in size by mechanical means
Reduces cysts such as Cryptosporidium
and Giardia by mechanical means
20" prefilter cartridge captures larger dirt
particles and extends the life of the
MC² cartridges
SS-IMF cartridge inhibits limescale buildup
in ice machines and coffee brewers
* Validated by ISO 17025 accredited lab
for 99.999% reduction of Pseudomonas
diminuta following the ASTM F838-05
protocol for the validation of 0.2 μm
sterilizing grade filters.