Specification

FOODSERVICE
EV9799-02 SPECIFICATION SHEET
INHIBITS MINERAL SCALE DEPOSITS AND PROVIDES CORROSION PROTECTION IN WATER-FED EQUIPMENT*
Housing not included.
Fits standard 10" housings. Order Model
A-10 clear housing (EV9100-01) for
temperatures less than 125°F (51.67°C)*.
Make sure selected housing fits
temperature and pressure conditions.
Install vertically with black O-band seal up.
The SS-10 ScaleStick
®
cartridge cannot be
installed into filter wraps.
Flushing is not required for
ScaleStick
®
cartridges.
Deliming of equipment prior to application
is recommended but not required.
Inspect ScaleStick
®
cartridges at least
every six (6) months.
Replace ScaleStick
®
before Hydroblend™
compound is completely dissolved.
Pre-existing equipment scale may come
loose and clog equipment. Remove any
loose scale to assure satisfactory operation.
Service Flow Rate: 0.1 - 6 gpm
(0.3 - 22.7 Lpm)*
Capacity: Approximately six (6) months.
Capacity will vary depending on
application and water usage. On flow rates
less than 1 gpm (3.78 Lpm), capacities
may be reduced*
INSTALLATION TIPS OPERATION TIPS SIZING
SS-10 Cartridge: EV9799-02
EVERPURE
®
SS-10 SCALESTICK
®
CARTRIDGE
*Not performance tested or certified by NSF
®
Water-Using Equipment
Steamers
Combi Ovens
Ice
Features Hydroblend™ compound, a unique
blend that inhibits mineral scale deposits
and provides a corrosion protection in low
flow water-fed equipment*
Patented design dispenses a controlled
amount of Hydroblend™ for long
term protection and provides greater
effectiveness than standard
phosphate treatments
Translucent cartridge allows simple visual
monitoring of product usage and ensures
against wasteful premature
cartridge replacement
APPLICATIONS
FEATURES • BENEFITS
Coffee
Espresso
Proofers
Integral feed cartridge fits most standard
10" housings
Unaffected by high temperatures, the
SS-10 cartridge accomodates a wide
variety of applications
SS-10 cartridge fits all current SR-X
housings and all existing old style
AR-X housings*