Instructions / Assembly

ManualsBrandsEverpure ManualsKitchenQC7I Single Water Filter Head

FILTRATION & PROCESSING SOLUTIONS

QC7I SERIES FILTERS INSTALLATION AND OPERATION GUIDE

SELECTING A MOUNTING LOCATION

1. Give consideration to the weight of the unit when operating (filled with water). Operating weights of the QC7I systems are:

• Single - 9 lbs (4 kg)

• Twin - 19 lbs (8.5 kg)

• Triple - 27 lbs (12 kg)

• Quad - 36 lbs (20 kg)

2. The location should allow for:

• Minimum clearance of 2.5 inches (6.3 cm) under the

cartridge(s) so it can be lowered for removal

and replacement.

• Adequate space for “in” and “out” water line connections.

• Be near a drain for flushing and near a 110V outlet if the

accessory (sold separately) Everguard™ Low Pressure Alarm (LPA) is used.

3. If used in conjunction with the Everpure SR-X Feeder, the SR-X should be mounted after the QC7I Series Filter and as

near the equipment as possible. If possible, keep at least 6 inches (15.2 cm) available to the left and the right of the QC7I

System in the event poor quality water conditions require the installation of the optional Everpure E-Series Prefilter.

WARNING: Do not use the MH cartridge in conjunction with the SR-X.

DIMENSIONS

Made in U.S.A.

WATER FILTER

EVERPURE

3072-61

QC7I

120

EVERPURE

PSI

100

Inlet

3/8-inch

FNPT

Outlet

3/8-inch

FNPT

27.50 inches

(69.8 cm)

5.60 inches

(14.2 cm)

Inlet

3/4-inch MNPT

Outlet

3/4-inch FNPT

25.26 inches

(64.2 cm)

16.60 inches

(42.1 cm)

Inlet

3/4-inch MNP

Outlet

3/4-inch FNPT

29.26 inches

(74.3 cm)

21 inches

(53.3 cm)

Inlet

3/4-inch MNP

Outlet

3/4-inch FNPT

29.69 inches

(75.4 cm)

24.60 inches

(62.3 cm)

Single System Twin System Triple System Quad System

Single System Twin System

EVERPURE

QC7I SERIES WATER FILTERS

Triple System Quad System

System Tested and Certified by NSF International against NSF/ANSI Standards 42 and 53 for

the reduction of:

Standard No. 42 — Aesthetic Effects Standard No. 53 — Health Effects

Bacteriostatic Effects

Mechanical Filtration

Cyst (MC, MC

, MH, MH

XC, XC

only)

Asbestos (MC, MC

, MH, MH

only)

Chemical Reduction

Taste and Odor

Chlorine

Mechanical Filtration

Nominal Particulate Class I (MC, MC

XC, XC

only).

Summary of content (4 pages)

PAGE 1
EVERPURE QC7I SERIES WATER FILTERS ® Single System Twin System Triple System Quad System SELECTING A MOUNTING LOCATION 1. Give consideration to the weight of the unit when operating (filled with water). Operating weights of the QC7I systems are: • Single - 9 lbs (4 kg) • Twin - 19 lbs (8.5 kg) • Triple - 27 lbs (12 kg) • Quad - 36 lbs (20 kg) 2. The location should allow for: System Tested and Certified by NSF International against NSF/ANSI Standards 42 and 53 for the reduction of: Standard No.
PAGE 2
OPERATING SPECIFICATIONS* Combined Model Name Replacement Cartridges Flow Rate Capacity Combined Model Name Replacement Cartridges Flow Rate Capacity QC7I Quad - MC MC 6.6 gpm (24.9 Lpm) 36,000 gal (136,274 L) QC7I Single - MC MC 1.67 gpm (6.3 Lpm) 9,000 gal (34,068 L) 2 QC7I Quad - MC MC 2 6.6 gpm (24.9 Lpm) 36,000 gal (136,274 L) 2 QC7I Single - MC MC 2 1.67 gpm (6.3 Lpm) 9,000 gal (34,068 L) QC7I Quad - MH MH 6.6 gpm (24.
PAGE 3
CARTRIDGE CHANGE DETERMINATION Replace cartridges when capacity is reached, or when flow becomes inadequate, but at least annually. All cartridges on multiple cartridge systems should be changed at the same time. The Everpure® Pressure Gauge or Everguard™ Low Pressure Alarm (LPA) provides a quick and simple means of determining when the filter cartridge(s) should be changed.
PAGE 4
LIMITED WARRANTY COMMERCIAL WATER TREATMENT EQUIPMENT You have just purchased one of the finest water treatment units made. As an expression of confidence in this product, Pentair Filtration Solutions, LLC (“PFS”) offers the following product warranty. This product is warranted against material defects in materials and workmanship to the original end-user when installed in accordance with the PFS specifications.