Assembly Instructions

CHAIR
Page 2 of 2
STEP 1:
1. Please put Chair Body (1) upside down on a carpeted or padded surface.
2. Open the zipper on the bottom of the Chair Body (1) and take out the 4 pieces of Legs (2) and hardware
package.
2. Attach 4 pieces of Legs (2) to the corner of Chair Body (1) by using 8 pieces of Bolts (A) with
8 pieces of Spring Washers (B) and 8 pieces of Flat Washers (C) as shown.
4. Use Allen Wrench (D) to tighten all Bolts (A) clockwise as shown.
Legs+ Hardware package inside
STEP 2:
Close the zipper on the bottom of Chair Body (1). Carefully turn over the assembled chair.
Put the seat cushion on the seat and fix by the Velcro.
Assembly is complete. Your Chair is ready to enjoy now!