Caution: You must read this before you proceed Bar Cart Label Picture Description QTY A Right Frame 1 B Lef Frame 1
C Side Frame 4 D Glass 2 E Wheel 2 F Wheel with Brake 2 Label Picture Description QTY ① Allen Key(M6) 1 ② Bolt(M6*15MM) 18 ③ Spanner(M10) 1
④ Glass Suction Cup Before Beginning Assembly: Overview Glass(D) Side Frame(C) Right Frame(A) Left Frame(B) Wheel with Brake(E) Wheels (F) FRONT FACING 14
This Bar Cart has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Bar Cart parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly. Step 1 Unpack all parts and place on a clean, non-marring surface. Step 2 B ② C C ① B Attach Side Frame(C) to the Left Frame(B) using Bolt(②) with Allen Key(①). Loosely tighten the Bolts.
Step 3 C C B B ② ① Repeat Step 2 to assemble rest Side Frame using Bolt(②) with Allen Key(①). Loosely tighten the Bolts. Step 4 C C ① B ② A Attach Right Frame (A)to Side Frame(C) using Bolt(②) with Allen Key(①). Loosely tighten the Bolts.
Step 5 ③ Attach Wheel with Brake (F) to Right Frame(A) using Spanner(③). Step 6 ③ Attach Wheel(E) to Left Frame(B) using Spanner(③).
Step 7 Turn the Bar Cart right side up. Step 8 Attach Glass Suction Cup (④) to Side Frame(C) as shown.
Step 9 D D D Attach Glass (D) to Side Frame (C). Remind:Gently press the glass after you put it into the frame. Please pressure down on each corner to adjust the gap between glass and frame. Then,Tighten all bolts at all joints fully in a sequential manner. Step 10 Your Bar Cart is ready for use. This Bar Cart can only be used on a flat ,level surface.
