Installation & Assembly

Table Of Contents

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation.

Locate all hardware & components before discarding packaging

Mounting Strap (A) Body (B) Canopy (C)

Cleaning & Care:

Clean with soft cloth and a mild detergent.

Do not use abrasive cleaner.

Page 2 of (3)

1).

Step.1:

Remove mounting bracket (A) from

fixture and install to electrical box.

3).

Step.3:

Wire fixture to wires in outlet box.

Green wire is fo Ground.

4).

Step.4:

2).

Step.2:

Press the wire restraint to adjust the

desired length of cable. Secure the

cables.

Bulb (F)Nut (D)

(A)

(E)

(A)

(C)

(L)positire

ground wire (green wire)

(N)neutral

Install body (B) to Mounting Strap (A)

and tighten Screw (D) through the hole

of canopy (C) on the Mounting Strap

(A).