Datasheet

EVERLIGHT ELECTRONICS CO.,LTD.
12-215SURC/S530-A2/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1.0 Page: 9 of 9
Device No.: DSE-125- Prepared date: 08-03-2004 Prepared by: Kenny Wang
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
E
VERLIGHT ELECTRONICS CO., LTD. Tel: [phone]
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: [phone]
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com