Datasheet

ManualsBrandsEverlight Electronics ManualsIR LEDsIR-LED 850nm 3mm T-1

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev3.0 Page: 1 of 7

Device No：DIH-020-007 Prepared date：06-08-2004 Prepared by：JAINE TSAI

Technical Data Sheet

3mm Infrared LED,

T-1

HIR204/H0

Features

․High reliability

․High radiant intensity

․Peak wavelength λp=850nm

․2.54mm Lead spacing

․Low forward voltage

․Pb free

Descriptions

․EVERLIGHT’s infrared emitting diode(HIR204/H0)

is a high intensity diode , molded in a yellow transparent plastic

package.

․The device is spectrally matched with phototransistor , photodiode

and infrared receiver module.

Applications

․Free air transmission system

․Infrared remote control units with high power requirement

․Smoke detector

․Infrared applied system

Device Selection Guide

Chip

LED Part No.

Material

Lens Color

HIR GaAlAs Yellow

Summary of content (7 pages)

PAGE 1
Technical Data Sheet 3mm Infrared LED, T-1 HIR204/H0 Features ․High reliability ․High radiant intensity ․Peak wavelength λp=850nm ․2.54mm Lead spacing ․Low forward voltage ․Pb free Descriptions ․EVERLIGHT’s infrared emitting diode(HIR204/H0) is a high intensity diode , molded in a yellow transparent plastic package. ․The device is spectrally matched with phototransistor , photodiode and infrared receiver module.
PAGE 2
HIR204/H0 Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ± 0.25mm Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Continuous Forward Current IF 100 Units mA Peak Forward Current IFP 1.
PAGE 3
HIR204/H0 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Radiant Intensity Ee Condition IF=20mA Min. Typ. Max. 4.0 8.9 -- IF=100mA -- 30 -- -- 380 -- 850 -- Pulse Width≦100μs ,Duty≦1% IF=1A Pulse Width≦100μs ,Duty≦1%. Peak Wavelength λp IF=20mA -- Spectral Bandwidth Δλ IF=20mA -- -- 1.45 1.65 -- 1.80 2.40 -- 4.10 5.25 VR=5V -- -- 10 IF=20mA -- 40 -- IF=100mA VF Pulse Width≦100μs ,Duty≦1% IF=1A Pulse Width≦100μs ,Duty≦1%.
PAGE 4
HIR204/H0 Typical Electro-Optical Characteristics Curves Fig.1 Forward Current vs. Ambient Temperature Fig.2 Spectral Distribution 140 100 120 IF=20mA Ta=25 ° C 80 100 80 60 60 40 40 20 20 0 0 -40 -20 0 Fig.3 20 40 60 80 790 810 830 850 870 890 910 930 950 100 Peak Emission Wavelength Ambient Temperature Fig.4 Forward Current vs. Forward Voltage 4 10 900 875 3 10 850 2 10 825 800 -25 1 10 0 25 50 75 100 0 1 2 3 4 5 6 7 Everlight Electronics Co., Ltd. http:\\www.
PAGE 5
HIR204/H0 Typical Electro-Optical Characteristics Curves Fig.5 Relative Intensity vs. Fig.6 Relative Radiant Intensity vs. Forward Current Angular Displacement -20 Ie-Radiant Intensity(mW/sr) 1000 -10 0 10 20 30 100 10 0 0 10 1 10 2 10 10 3 1.0 40 0.9 50 0.8 0.7 60 10 4 70 80 0.6 0.4 0.2 0 0.2 0.4 0.6 IF-Forward Current (mA) Fig.7 Relative Intensity vs. Ambient Temperature(° C) Fig.8 Forward Current vs. Ambient Temperature(° C) 1.6 15 1.4 10 IF=20mA IF=20mA 5 1.
PAGE 6
HIR204/H0 Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% NO. Item Test Conditions Test Hours/ Sample Failure Cycles Sizes Judgement Criteria TEMP.：260℃± 5℃ 10secs 15mins 50Cycles 2 Temperature Cycle H : +100℃ 5mins L : -40℃ 15mins 1 Solder Heat 3 Thermal Shock H :+100℃ 5mins 50Cycles 10secs 5mins L :-10℃ 22pcs 22pcs Ac/Re 0/1 IR≧U× 2 Ee≦L× 0.8 VF≧U× 1.
PAGE 7
HIR204/H0 Packing Quantity Specification 1.1000PCS/1Bag，4Bags/1Box 2.10Boxes/1Carton Label Form Specification CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place HIR204/H0 Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2.