Datasheet

ManualsBrandsEverlight Electronics ManualsLEDsSMD LED 468nm PLCC-2 565mcd 20mA

Technical Data Sheet

Top View LEDs

67-21/BHC-FQ1R2F/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 10

Device No. :

DSE-0002605 Prepared date: 25-Jun-2008 Prepared by: Rita Shen

Features

․P-LCC-2 package.

․White package.

․Optical indicator.

․Colorless clear window.

․Wide viewing angle.

․Suitable for vapor-phase reflow, Infrared reflow

and wave solder processes.

․Computable with automatic placement equipment.

․Available on tape and reel (8mm Tape).

․Pb-free.

․The product itself will remain within RoHS

compliant version

Descriptions

․Due to the package design, the LED has wide viewing angle and optimized light coupling by

inter reflector.

․This feature makes the ideal for light pipe application. The low current requirement makes

this device ideal for portable equipment or any other application where power is at a

premium.

Applications

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․Light pipe application.

․General use.

Device Selection Guide

Chip

Material

Emitted Color Resin Color

InGaN Blue Water Clear

Summary of content (10 pages)

PAGE 1
Technical Data Sheet Top View LEDs 67-21/BHC-FQ1R2F/2T Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free.
PAGE 2
Technical Data Sheet Top View LEDs 67-21/BHC-FQ1R2F/2T Package Dimensions Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 10 Device No.
PAGE 3
Technical Data Sheet Top View LEDs 67-21/BHC-FQ1R2F/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Units Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current(Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 60 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec.
PAGE 4
Technical Data Sheet Top View LEDs 67-21/BHC-FQ1R2F/2T Bin Range of Luminous Intensity Bin Code Min. Max. Q1 72 90 Q2 90 112 R1 112 140 R2 140 180 Unit Condition mcd IF=20mA Unit Condition nm IF=20mA Unit Condition V IF=20mA Bin Range of Dominant Wavelength Group F Bin Code Min. Max. AA1 464.0 466.0 AA2 466.0 468.0 AA3 468.0 470.0 AA4 470.0 472.0 Bin Code Min. Max. 10 2.70 2.90 11 2.90 3.10 12 3.10 3.30 13 3.30 3.
PAGE 5
Technical Data Sheet Top View LEDs 67-21/BHC-FQ1R2F/2T Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C 50 Forward Current I F (mA) Relative luminous intensity (%) 100 75 50 25 0 500 450 500 550 Wavelength λ (nm) 40 30 20 10 0 1.2 600 2.0 2.4 2.
PAGE 6
Technical Data Sheet Top View LEDs 67-21/BHC-FQ1R2F/2T Label Explanation Pb CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank EVERLIGHT CPN : P N : XXXXXXXXXXXXX REF: Forward Voltage Rank RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 10 Device No.
PAGE 7
Technical Data Sheet Top View LEDs 67-21/BHC-FQ1R2F/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 10 Device No.
PAGE 8
Technical Data Sheet Top View LEDs 67-21/BHC-FQ1R2F/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Max. 10 sec. 6 Min. 22 PCS 0/1 2 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS.
PAGE 9
Technical Data Sheet Top View LEDs 67-21/BHC-FQ1R2F/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 72 hours under 30℃ or less and 60% RH or less.
PAGE 10
Technical Data Sheet Top View LEDs 67-21/BHC-FQ1R2F/2T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered.