LAMP 524UYD/S530-A3 Features • Choice of various viewing angles • Available on tape and reel. • Reliable and robust • Pb free • The product itself will remain within RoHS compliant version. Description •The series is specially designed for applications requiring higher brightness •The led lamps are available with different colors, intensities.. Applications • TV set • Monitor • Telephone • Computer 1 Copyright © 2010, Everlight All Rights Reserved. Release Date : Jun.13.2017.Issue No: DLE-0009229_Rev.
DATASHEET LAMP 524UYD/S530-A3 Device Selection Guide Chip Emitted Color Materials AlGaInP Resin Color Super Yellow Yellow Diffused Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit IF 25 mA ESD 2000 V VR 5 V Power Dissipation Pd 60 mW Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Soldering Temperature Tsol Continuous Forward Current Electrostatic Discharge Reverse Voltage 260 ℃ for 5 sec.
DATASHEET LAMP 524UYD/S530-A3 Typical Electro-Optical Characteristics Curves Directivity (Ta=25℃) Radiation Angle Relative Intensity (a.u.) Relative Intensity vs. Wavelength (Ta=25℃) Wavelength (nm) Relative Intensity vs. Forward Current (Ta=25℃) Forward Current (mA) Relative Intensity(a.u.) Forward Current vs. Forward Voltage (Ta=25℃) Relative Intensity (a.u.) Forward Voltage (V) Forward Current (mA) Ambient Temperature Ta(℃) 3 Forward Current vs. Ambient Temp.
DATASHEET LAMP 524UYD/S530-A3 Package Dimension Note: Note: 1. All dimensions are in millimeters 2. The height of flange must be less than 1.5mm(0.059"). 3. Without special declared, the tolerance is ±0.25mm. Moisture Resistant Packing Materials Label Explanation 4 Copyright © 2010, Everlight All Rights Reserved. Release Date : Jun.13.2017.Issue No: DLE-0009229_Rev.2 Ver.:2 Release Date:06/14/2017 狀態:Approved(正式發行) www.everlight.
DATASHEET LAMP 524UYD/S530-A3 CPN: Customer's Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Dominant Wavelength REF: Reference LOT No: Lot Number Packing Specification ■ Anti-electrostatic bag ■ Inner Carton ■ Outside Carton Pb EL ECTROSTATIC ELECTRONAGNETIC MAGNETIC OR RADIOACTIVE RELDS anti-static for 750 ■ Packing Quantity 1. MIN 200 To 500 PCS/1 Bag, 5 Bags/1 Box 2. 10 Boxes/1 Carton 5 Copyright © 2010, Everlight All Rights Reserved. Release Date : Jun.13.
DATASHEET LAMP 524UYD/S530-A3 Notes 1. Lead Forming During lead formation, the leads should be bent at a point at least 3mm from the base of the epoxy bulb. Lead forming should be done before soldering. Avoid stressing the LED package during leads forming. The stress to the base may damage the LED’s characteristics or it may break the LEDs. Cut the LED lead frames at room temperature. Cutting the lead frames at high temperatures may cause failure of the LEDs.
DATASHEET LAMP 524UYD/S530-A3 Although the recommended soldering conditions are specified in the above table, dip or hand soldering at the lowest possible temperature is desirable for the LEDs. Wave soldering parameter must be set and maintain according to recommended temperature and dwell time in the solder wave. 4. Cleaning When necessary, cleaning should occur only with isopropyl alcohol at room temperature for a duration of no more than one minute. Dry at room temperature before use.
DATASHEET LAMP 524UYD/S530-A3 DISCLAIMER 1. EVERLIGHT reserves the right(s) on the adjustment of product material mix for the specification. 2. The product meets EVERLIGHT published specification for a period of twelve (12) months from date of shipment. 3. The graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets.
