Datasheet

EVERLIGHT ELECTRONICS CO., LTD.
MODEL NO:
42-21UBC/C470/TR8
Device Number：
DSE-421-021 REV. 1.0
1.8mm Round Subminiature LEDs
ECN：
Page: 7/8
■
■■
■ Soldering heat reliability ( DIP )
Please refer to the following figure :
■ Soldering Iron
Basic spec is ≦5 sec when 260℃.If temperature is higher, time should be shorter (+10℃
→ -1sec). Power dissipation of iron should be smaller than 15 W , and temperature should
be controllable. Surface temperature of the device should be under 230 ℃.
■ Rework
1. Customer must finish rework within 5 sec under 260℃.
2. The head of iron can not touch copper foil.
3. Twin-head type is preferred.
○
×