Datasheet

EVERLIGHT ELECTRONICS CO., LTD.
MODEL NO:
42-21 SURC/S530-A2/TR8
Device Number
：
DSE-421-026 REV. 1.0
1.8mm Round Subminiature LEDs
ECN
：
Page: 7/8
■
■■
■
Soldering heat reliability ( DIP ) :
Please refer to the following figure :
■
Soldering Iron :
Basic spec is
≦
5 sec when 260
℃
.If temperature is higher, time should be shorter (+10
℃
→
-1sec). Power dissipation of iron should be smaller than 15 W , and temperature should
be controllable. Surface temperature of the device should be under 230
℃
.
■
Rework :
1. Customer must finish rework within 5 sec under 260
℃
.
2. The head of iron can not touch copper foil.
3. Twin-head type is preferred.
○
×