Datasheet

ManualsBrandsEverlight Electronics ManualsLEDsSMD LED Right Angle White 112mcd 0602

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 12

Device No. : DSE-0002165 Prepared date:27th-Aug.-2009 Prepared by: Zhang Jiang

Technical Data Sheet

Chip LED with Right Angle Resin

27-21/T3D-AP2Q2HY/3C

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Mono-color type.

․Pb-free.

․The product itself will remain within RoHS compliant version.

Descriptions

․The 27-21 SMD LED is much smaller than lead

frame type components, thus enable smaller

board size, higher packing density, reduced

storage space and finally smaller equipment to be

obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Part No.

Material

Emitted Color Resin Color

27-21/T3D-AP2Q2HY/3C InGaN Pure White Yellow Diffused

Summary of content (12 pages)

PAGE 1
Technical Data Sheet Chip LED with Right Angle Resin 27-21/T3D-AP2Q2HY/3C Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version.
PAGE 2
7-21/T3D-AP2Q2HY/3C Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm,Unit = mm. Everlight Electronics Co., Ltd. Device No. : DSE-0002165 http://www.everlight.com Prepared date:27th-Aug.-2009 Rev.
PAGE 3
27-21/T3D-AP2Q2HY/3C Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260℃ for 10sec. Hand Soldering : 350℃ for 3 sec.
PAGE 4
27-21/T3D-AP2Q2HY/3C Bin Range Of Luminous Intensity Bin Min. Max. P2 57.0 72.0 Q1 72.0 90.0 Q2 90.0 112 Unit Condition mcd IF =5mA Unit Condition V IF =5mA Bin Range Of Luminous Voltage Group H Bin Min Max 15 2.70 2.85 16 2.85 3.00 17 3.00 3.15 Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No. : DSE-0002165 http://www.everlight.com Prepared date:27th-Aug.-2009 Rev.
PAGE 5
27-21/T3D-AP2Q2HY/3C Chromaticity Coordinates Specifications for Bin Grading IF= 5mA Groups Bin Code 1 2 3 A 4 5 6 CIE_x CIE_y 0.274 0.274 0.294 0.294 0.274 0.274 0.294 0.294 0.294 0.294 0.314 0.314 0.294 0.294 0.314 0.314 0.314 0.314 0.334 0.334 0.314 0.314 0.334 0.334 0.226 0.258 0.286 0.254 0.258 0.291 0.319 0.286 0.254 0.286 0.315 0.282 0.286 0.319 0.347 0.315 0.282 0.315 0.343 0.311 0.315 0.347 0.376 0.343 Notes: 1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01). 2.
PAGE 6
27-21/T3D-AP2Q2HY/3C CIE Chromaticity Diagram Everlight Electronics Co., Ltd. Device No. : DSE-0002165 http://www.everlight.com Prepared date:27th-Aug.-2009 Rev.
PAGE 7
27-21/T3D-AP2Q2HY/3C Typical Electro-Optical Characteristics Curves Ta=25°C Forward Current I (mA) Relative luminous intensity ( % ) Ta=25°C Wavelength λ(nm) Forward Voltage VF (V) Relative luminous intensity ( %) Relative luminous intensity ( % ) Ta=25°C 1000 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta (°C ) Forward Current I (mA) Forward Current I (mA) Ta=25°C Ambient Temperature Ta (°C ) Everlight Electronics Co., Ltd. Device No. : DSE-0002165 http://www.everlight.
PAGE 8
27-21/T3D-AP2Q2HY/3C Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm, Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0002165 http://www.everlight.com Prepared date:27th-Aug.-2009 Rev.
PAGE 9
27-21/T3D-AP2Q2HY/3C Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm, Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No. : DSE-0002165 Desiccant http://www.everlight.com Prepared date:27th-Aug.-2009 Label Rev.
PAGE 10
27-21/T3D-AP2Q2HY/3C Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp.
PAGE 11
27-21/T3D-AP2Q2HY/3C Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
PAGE 12
27-21/T3D-AP2Q2HY/3C 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered.