Datasheet

ManualsBrandsEverlight Electronics ManualsLEDsSMD LED RGB 1.7 ... 3.7V 1204

www.everlight.com

SMD  B

23-23B/R6GHBHC-A01/2A

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow solder process.

․Mono-color type.

․Pb-free.

․The product itself will remain within RoHS compliant version.

Description

․The 23-23B SMD LED is much smaller than lead frame type components, thus enable smaller board ize,

higher packing density, reduced storage space and finally smaller equipment to be obtained.

․Besides, lightweight makes them ideal for miniature applications. etc.

Applications

․Telecommunication: indicator and backlighting in telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Summary of content (10 pages)

PAGE 1
SMD  B 23-23B/R6GHBHC-A01/2A Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Description ․The 23-23B SMD LED is much smaller than lead frame type components, thus enable smaller board ize, higher packing density, reduced storage space and finally smaller equipment to be obtained.
PAGE 2
DATASHEET SMD  B 23-23B/R6GHBHC-A01/2A Device Selection Guide Chip Type Chip Materials Emitted Color Resin Color R6 AlGaInP Brilliant Red GH InGaN Brilliant Green BH InGaN Blue Water Clear Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Reverse Voltage VR Forward Current IF Peak Forward Current (Duty 1/10 @1KHz) IFP Power Dissipation Pd Operating Temperature Storage Temperature Topr Tstg Electrostatic Discharge ESDHBM Soldering Temperature Tsol Rating Unit 5 V R6：25 GH
PAGE 3
DATASHEET SMD  B 23-23B/R6GHBHC-A01/2A Typical Electro-Optical Characteristics Curves R6 3 Copyright © 2010, Everlight All Rights Reserved. Release Date : Jun.16.2014. Issue No: DSE-0008848 Rev.6 www.everlight.
PAGE 4
DATASHEET SMD  B 23-23B/R6GHBHC-A01/2A Typical Electro-Optical Characteristics Curves GH 4 Copyright © 2010, Everlight All Rights Reserved. Release Date : Jun.16.2014. Issue No: DSE-0008848 Rev.6 www.everlight.
PAGE 5
DATASHEET SMD  B 23-23B/R6GHBHC-A01/2A Typical Electro-Optical Characteristics Curves BH 5 Copyright © 2010, Everlight All Rights Reserved. Release Date : Jun.16.2014. Issue No: DSE-0008848 Rev.6 www.everlight.
PAGE 6
DATASHEET SMD  B 23-23B/R6GHBHC-A01/2A Package Outline Dimensions Note: Tolerances unless mentioned ±0.1mm. Unit = mm 6 Copyright © 2010, Everlight All Rights Reserved. Release Date : Jun.16.2014. Issue No: DSE-0008848 Rev.6 www.everlight.
PAGE 7
DATASHEET SMD  B 23-23B/R6GHBHC-A01/2A Moisture Resistant Packing Materials Label Explanation Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Chromaticity Coordinates & Dom.
PAGE 8
DATASHEET SMD  B 23-23B/R6GHBHC-A01/2A Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label 8 Aluminum moisture-proof bag Desiccant Label Copyright © 2010, Everlight All Rights Reserved. Release Date : Jun.16.2014. Issue No: DSE-0008848 Rev.6 www.everlight.
PAGE 9
DATASHEET SMD  B 23-23B/R6GHBHC-A01/2A Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
PAGE 10
DATASHEET SMD  B 23-23B/R6GHBHC-A01/2A Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document.