Datasheet

ManualsBrandsEverlight Electronics ManualsLEDsSMD LED RGB 1.7 ... 3.1V Side Looking

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2011-01-21 18:00:13.0

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 13

Device No. : DSE-0001583 Prepared date: 21-Jan-2011 Prepared by: Esther Yan

Technical Data Sheet

Full Color Chip LED (Chip LED with Right Angle Lens)

22-23C/R6GHBHW-C01/2C

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Full-color type.

․Pb-free.

․Halogen-free.

․Component surface is Tin plating.

․The product itself will remain within RoHS

compliant version.

Descriptions

․The 22-23C SMD LED is much smaller

than lead frame type components, thus

enable smaller board size, higher packing

density, reduced storage space and finally

smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Type Material Emitted Color

Resin Color

R6 AlGaInP Brilliant Red

GH InGaN Brilliant Green

BH InGaN Blue

White Diffused

Summary of content (13 pages)

PAGE 1
Technical Data Sheet Full Color Chip LED (Chip LED with Right Angle Lens) 22-23C/R6GHBHW-C01/2C Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Full-color type. ․Pb-free. ․Halogen-free. ․Component surface is Tin plating. ․The product itself will remain within RoHS compliant version.
PAGE 2
2-23C/R6GHBHW-C01/2C Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0001583 Prepared date: 21-Jan-2011 Revision :2 LifecyclePhase: Rev. 2 Page: 2 of 13 Prepared by: Esther Yan Release Date:2011-01-21 18:00:13.
PAGE 3
22-23C/R6GHBHW-C01/2C Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V R6:25 Forward Current GH:25 IF mA BH:25 Peak Forward Current (Duty 1/20 @Pulse 1ms) R6:60 IFP GH:100 mA BH:100 R6:60 Power Dissipation Pd GH:95 mW BH:95 R6:2000 Electrostatic Discharge ESD GH:150 V BH:150 Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.
PAGE 4
22-23C/R6GHBHW-C01/2C Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Symbol Iv Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current R6 GH BH 2θ1/2 λp λd R6 GH BH R6 GH BH R6 △λ GH BH VF IR R6 GH BH R6 GH BH Min. Typ. 14.5 35.0 Unit Condition mcd IF=5mA ----- deg IF=5mA ----- nm IF=5mA nm IF=5mA nm IF=5mA V IF=5mA μA VR=5V 36.0 ----- 10.0 ----- Max. 110 24.5 130 626 ----- 518 468 613.
PAGE 5
22-23C/R6GHBHW-C01/2C R6 Bin Range Of Luminous Intensity Bin Min Max 1 14.5 22.5 2 22.5 36.0 Unit Condition mcd IF=5mA Unit Condition mcd IF=5mA Unit Condition nm IF=5mA Unit Condition mcd IF=5mA GH Bin Range Of Luminous Intensity Bin Min Max A 35.0 55.0 B 55.0 80.0 C 80.0 110 Bin Range Of Dom. Wavelength Bin Min Max 1 523.0 531.5 2 531.5 540.0 BH Bin Range Of Luminous Intensity Bin Min Max 1 10.0 17.5 2 17.5 24.
PAGE 6
22-23C/R6GHBHW-C01/2C Typical Electro-Optical Characteristics Curves R6 Forward Current vs. Forward Voltage Ta=25°C 75 50 25 0 500 1000 550 600 650 Wavelength λ (nm) 40 30 25 20 10 0 1.2 700 Luminous Intensity vs. Luminous Intensity vs. Forward Current 100 10 1 -60 -40 -20 100 10 1 0 10 0 20 40 60 80 100 Forward Current IF (mA) 10 1 10 2 Forward Current IF (mA) Radiation Diagram 0° 10° 50 Ta=25°C 20° 30° 40 40° 1.0 30 25 20 10 0 0.9 50° 0.8 60° 70° 0.
PAGE 7
22-23C/R6GHBHW-C01/2C Typical Electro-Optical Characteristics Curves GH Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C Forward Current IF (mA) Relative luminous intensity (%) Ta=25°C Forward Voltage VF (V) Wavelength λ (nm) Luminous Intensity vs. Forward Current Ta=25°C Luminous Intensity vs.
PAGE 8
22-23C/R6GHBHW-C01/2C Typical Electro-Optical Characteristics Curves BH Forward Current vs. Forward Voltage Ta=25°C 100 Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 75 50 25 0 400 450 500 550 40 30 25 20 10 0 2.6 600 Wavelength λ (nm) Relative luminous intensity (%) Relative luminous intensity (%) 100 10 Forward Current IF (mA) 4.
PAGE 9
22-23C/R6GHBHW-C01/2C Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm , Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0001583 Prepared date: 21-Jan-2011 Revision :2 LifecyclePhase: Rev.
PAGE 10
22-23C/R6GHBHW-C01/2C Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0001583 Prepared date: 21-Jan-2011 Revision :2 LifecyclePhase: Desiccant Rev. 2 Label Page: 10 of 13 Prepared by: Esther Yan Release Date:2011-01-21 18:00:13.
PAGE 11
22-23C/R6GHBHW-C01/2C Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Ac/Re Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Max. 10sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS.
PAGE 12
22-23C/R6GHBHW-C01/2C Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
PAGE 13
22-23C/R6GHBHW-C01/2C 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered.