Datasheet

ManualsBrandsEverlight Electronics ManualsLEDsSMD LED RGB 2 ... 3.9V

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 12

Device No. : DSE-0002657 Prepared date: 07-May-2010 Prepared by : Ashley Kuo

Technical Data Sheet

0.35mm Height Chip LED with Full Color

19-337/R6GHBHC-A01/2T

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Full-color type.

․Pb-free

․The product itself will remain within RoHS

compliant version.

Descriptions

․The 19-337 SMD LED is much smaller

than lead frame type components, thus

enable smaller board size, higher packing

density, reduced storage space and finally

smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Type Material Emitted Color

Resin Color

R6 AlInGaN Brilliant Red

GH InGaN Brilliant Green

BH InGaN Blue

Water Clear

Summary of content (12 pages)

PAGE 1
Technical Data Sheet 0.35mm Height Chip LED with Full Color 19-337/R6GHBHC-A01/2T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Full-color type. ․Pb-free ․The product itself will remain within RoHS compliant version.
PAGE 2
19-337/R6GHBHC-A01/2T Package Outline Dimensions 1.6 1.6 B 1 4 2 5 3 6 G R Cathode mark 1.1 0.35 1.0 0.4 0.2 0.5 0.2 0.6 0.5 0.35 0.15 0.6 0.15 0.35 0.8 0.4 0.6 0.8 0.6 Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 12 Device No.
PAGE 3
19-337/R6GHBHC-A01/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V R6:25 Forward Current GH:25 IF mA BH:25 R6:60 Peak Forward Current IFP (Duty 1/10 @1KHz) GH:100 mA BH:100 R6:60 Power Dissipation GH:95 Pd mW BH:95 R6:2000 Electrostatic Discharge(HBM) ESD GH:150 V BH:150 Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.
PAGE 4
19-337/R6GHBHC-A01/2T Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Symbol Iv Min. Typ. R6 72 100 GH 112 180 BH 28.5 50 ----- 120 2θ1/2 Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage λp λd GH 518 468 R6 624 ----- 525 BH 470 R6 20 △λ GH VF ----- BH GH Unit ----- mcd ----- deg ----- nm ----- nm ----- nm 35 ----- BH 35 R6 2.0 2.4 3.3 3.9 3.3 3.
PAGE 5
19-337/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves R6 Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C Relative luminous intensity (%) Forward Current FI (mA) Ta=25°C Forward Voltage VF (V) Wavelength λ (nm) Luminous Intensity vs. Forward Current Ta=25°C Luminous Intensity vs.
PAGE 6
19-337/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves GH I (mA) 40 F 75 50 25 0 400 450 500 550 30 25 20 10 0 2.6 600 Luminous Intensity vs. Relative luminous intensity (%) Ambient Temperature 1000 100 10 1 -60 -40 -20 0 3.0 3.4 20 40 60 80 100 1000 4.5 f=1KHz Duty=1/10 100 10 1 10 10 10 Forward Current IF(mA) Ta=25°C Radiation Diagram Forward Current Derating Curve 0° 50 IF(mA) 4.
PAGE 7
19-337/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves BH Forward Current vs. Forward Voltage Ta=25°C 100 Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 75 50 25 0 400 450 500 550 40 30 25 20 10 0 2.6 600 3.4 3.8 4.2 Luminous Intensity vs. Luminous Intensity vs. Ambient Temperature Forward Current 100 10 1 -60 -40 -20 0 20 40 60 80 100 1000 4.
PAGE 8
19-337/R6GHBHC-A01/2T Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX REF: Forward Voltage Rank CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 12 Device No.
PAGE 9
19-337/R6GHBHC-A01/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 12 Device No.
PAGE 10
19-337/R6GHBHC-A01/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Max. 10sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp.
PAGE 11
19-337/R6GHBHC-A01/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
PAGE 12
19-337/R6GHBHC-A01/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered.