Datasheet

ManualsBrandsEverlight Electronics ManualsLEDsSMD LED 632nm 0402 40.5mcd 10mA

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 1 of 11

Device No. : DSE-163-R03 Prepared date: 06-Sep-2006 Prepared by: Ashley Kuo

Technical Data Sheet

0402 Package Chip LED (0.45mm Height)

16-213/R6C-A2225VZ/3T

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Mono-color type.

․Pb-free.

․The product itself will remain within RoHS

compliant version.

Descriptions

․The 16-213 SMD Taping is much smaller than

lead frame type components, thus enable smaller

board size, higher packing density, reduced

storage space and finally smaller equipment to be

obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Part No.

Material Emitted Color

Lens Color

16-213/R6C-A2225VZ/3T AlGaInP Brilliant Red Water Clear

Summary of content (11 pages)

PAGE 1
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 0402 Package Chip LED (0.45mm Height) 16-213/R6C-A2225VZ/3T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version.
PAGE 2
EVERLIGHT ELECTRONICS CO.,LTD. 16-213/R6C-A2225VZ/3T Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-163-R03 Prepared date: 06-Sep-2006 Rev.
PAGE 3
EVERLIGHT ELECTRONICS CO.,LTD. 16-213/R6C-A2225VZ/3T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA IFP 60 mA Power Dissipation Pd 60 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec.
PAGE 4
EVERLIGHT ELECTRONICS CO.,LTD. 16-213/R6C-A2225VZ/3T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity Iv 20.0 ---- 40.5 mcd Peak Wavelength λp ---- 632 ---- nm λd 617.5 ---- 633.5 nm Dominant Wavelength Spectrum Radiation Bandwidth △λ ---- 20 ---- nm Viewing Angle 2θ1/2 ---- 120 ---- deg Forward Voltage VF 1.7 ---- 2.2 V Reverse Current IR ---- ---- 10 μA Condition IF=10mA VR=5V Notes: 1.
PAGE 5
EVERLIGHT ELECTRONICS CO.,LTD. 16-213/R6C-A2225VZ/3T Bin Range Of Dom. Wavelength Group A Bin Min Max E4 617.5 621.5 E5 621.5 625.5 E6 625.5 629.5 E7 629.5 633.5 Unit Condition nm IF=10mA Bin Range Of Luminous Intensity Group Bin Min Max 22 20.0 23.0 23 23.0 26.5 24 26.5 30.5 25 30.5 35.0 26 35.0 40.5 22 23 24 25 Unit Condition mcd IF=10mA Bin Range Of Forward Voltage Group V Bin Min Max 19 1.7 1.8 20 1.8 1.9 21 1.9 2.0 22 2.0 2.1 23 2.1 2.
PAGE 6
EVERLIGHT ELECTRONICS CO.,LTD. 16-213/R6C-A2225VZ/3T Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-163-R03 Prepared date: 06-Sep-2006 Rev.
PAGE 7
EVERLIGHT ELECTRONICS CO.,LTD. 16-213/R6C-A2225VZ/3T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm , Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-163-R03 Prepared date: 06-Sep-2006 Rev.
PAGE 8
EVERLIGHT ELECTRONICS CO.,LTD. 16-213/R6C-A2225VZ/3T Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-163-R03 Prepared date: 06-Sep-2006 Label Rev.
PAGE 9
EVERLIGHT ELECTRONICS CO.,LTD. 16-213/R6C-A2225VZ/3T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp.
PAGE 10
EVERLIGHT ELECTRONICS CO.,LTD. 16-213/R6C-A2225VZ/3T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
PAGE 11
EVERLIGHT ELECTRONICS CO.,LTD. 16-213/R6C-A2225VZ/3T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered.