Datasheet

EVERLIGHT ELECTRONICS CO.,LTD.
15-21/G6C-FP1Q1L/2T
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 10 of 10
Device No:SZDSE-151-G06 Prepared date:23-Mar-2005 Prepared by: Zhang huali
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
E
VERLIGHT ELECTRONICS CO., LTD. Tel: [phone]-1603
Office: No 355,Zhong Shan North Rd ,WuJiang, Fax: [phone]-1510
Economy Development Zone(YunXi Area), http://www.everlight.com
SongLing Town,WuJiang City,JiangSu PRC, China.