Full Product Manual

96
Section 4 Trouble Shooting
OVERCURRENT SCREEN
An over current can be caused by several things.
• Running on undersized extension cord, or too long away from power source.
• Insufcient power source.
• Running on a generator that isn’t rated for wattage or for clean power.
• Internal fault has been caused by an external condition
• IGBT or PC board failure.
What to do:
• Turn off unit immediately.
• Investigate cause, remedy if possible.
• Try again.
• If cause cannot be found call Everlast.
STOP!
IF YOU SEE THIS SCREEN….