Manualshelf

Full Product Manual

ManualsBrandsEverlast ManualsMulti Process Welders250 Amp LightningMTS 275 IGBT Digital Inverter AC-DC MIG/TIG/Stick Multi-Process Welder, HF/Lift TIG Start, 240-Volt
61626364656667686970
66
Section 2 Setup Guide
SETTING UP WELDING PARAMETERS
SAVING PROGRAMMED SETTINGS
This welder provides a programmable memory function, which allows up to 16 individual, customized programs to be saved. Any
process can be saved.
To save settings:
1. Make any necessary adjustment to the desired program.
2. Press the Program (Pgm) button to access the program menu.
3. Use one of the arrow keys to select a number where the program can be saved. (Default saved programs can be saved over.
The default programs are place holders.)
4. Press the Program button again and hold for 3 to 4 seconds to save the program. The new program will be saved over the
old program.
5. Press home to return to the pinwheel menu.
6. To recall a program, Press program button and select desired program with an arrow key.
7. Press the Program button again to open the program.