Manualshelf

Full Product Manual

ManualsBrandsEverlast ManualsMulti Process Welders250 Amp LightningMTS 275 IGBT Digital Inverter AC-DC MIG/TIG/Stick Multi-Process Welder, HF/Lift TIG Start, 240-Volt
51525354555657585960
58
Section 2 Setup Guide
SETTING UP WELDING PARAMETERS
SELECTION OF 2T/4T CONTROL AND SPOOL GUN OPERATION
To change the way the torch trigger functions and/or select Spool gun operation:
1. Press and release the left arrow button one time to highlight the Control function.
2. Press and release the settings button (gear icon) to access the 4-Way menu.
3. Select the type of operation desired (This is also the menu where spool gun operation is turned on or off) by pressing and
releasing one of the arrow buttons until the desired style of control is highlighted. Depending upon selection choice, more
than one segment of the 4-Way menu may be highlighted as you continue to press the button.
4. Press and release the home button to return to the main pinwheel menu.
NOTICE: Access to the 4T setting will be blocked in MIG/Flux-Cored modes if Spot/Stitch is On. Without the Spot/Stitch feature
on, you may choose from 2T, 4T, 2T Spool Gun or 4T Spool Gun operation.