Manualshelf

Full Product Manual

ManualsBrandsEverlast ManualsMulti Process Welders250 Amp LightningMTS 275 IGBT Digital Inverter AC-DC MIG/TIG/Stick Multi-Process Welder, HF/Lift TIG Start, 240-Volt
41424344454647484950
41
TIG STEEL/STAINLESS (DC TIG) SELECTION AND ADJUSTMENT OF PULSE
1. To turn on and adjust the parameters of the pulse function, press and release either one of the arrow buttons several times
until the pulse segment of the pinwheel is highlighted.
2. Press and release the settings button to bring up the 4 way secondary menu to access the pulse on/off and pulse parameters.
3. Press and release one of the arrow buttons to highlight the pulse-on setting on the bottom bar. Once the Pulse is on, contin-
ue to press the arrow button to highlight the desired pulse parameter.
4. Rotate the top right control knob to adjust pulse parameters.
5. Once the pulse has been turned on and parameters have been adjusted, press and release the home button to return to the
main pinwheel menu.
NOTICE: After selecting the pulse for adjustment, the arrow key toggles to the pulse-on rst, then the selection jumps to the actual
pulse parameters. If the pulse is already on, and needs to be turned off, press the arrow button until the pulse-off is highlighted.
Once the pulse is turned off, simply press the home button to exit the 4-way menu.
Section 2 Setup Guide
SETTING UP WELDING PARAMETERS
DC TIG FUNCTIONS AND PARAMETER SELECTIONS