Manualshelf

Full Product Manual

ManualsBrandsEverlast ManualsMulti Process Welders250 Amp LightningMTS 275 IGBT Digital Inverter AC-DC MIG/TIG/Stick Multi-Process Welder, HF/Lift TIG Start, 240-Volt
31323334353637383940
39
TIG STEEL/STAINLESS (DC TIG) SELECTION OF ARC STARTING
1. To select the arc start type, press and release the right arrow button one time to highlight the right square box that indicates
arc start type. (This assumes the unit is in the default highlighted position: Amps)
2. Press and release the settings button to bring up the 4 way secondary menu to access the start types.
3. Press one of the arrow buttons to highlight the desired start type.
4. Once the start type has been highlighted, press and release the home button to return to the main pinwheel menu.
NOTICE: If there are any unassigned blocks in the 4-way menu, these will be skipped over during selection.
Section 2 Setup Guide
SETTING UP WELDING PARAMETERS
DC TIG FUNCTIONS AND PARAMETER SELECTIONS