Full Product Manual

33
Section 2 Setup Guide
SETTING UP WELDING PARAMETERS
PANEL CONTROLS AND NAVIGATION
NAVIGATION AND ADJUSTMENT SUMMARY
Although it may take a little practice at rst, the navigation of the screens and menu are fairly straight for-
ward. The left and right (arrow) buttons located below the screen will always navigate around
the pin wheel menu or 4-way menu Screen. In Power-Set mode, arrow buttons are used to select ller size/
type, or metal thickness and only navigate the X segment closest to the button. The (settings) button is
pressed to access the 4-Way Menu. This is a second level menu that allows access to other screens to se-
lect function status (on/off or different operation style such as 2T/4T/Pedal/ Finger etc.) or select or adjust
less commonly needed parameters of the selected function on the pin wheel menu. The (home) menu
button will always return the unit to the main pinwheel screen and make the welder ready for welding. The
top right knob adjusts the value of a highlighted parameter, or the top parameter in the Power-Set mode.
The bottom right knob is used less often in manual mode. When it is used, it is used to adjust Voltage,
AC Frequency or the bottom parameter in the Power-Set mode.
The (Program) button is used to access and save programmed settings.
NOTICE:
The (home) button and the (settings) button are inactive in the Power-Set menu. The (left arrow)
button controls only the left input segment in the Power-Set mode. The (right arrow) button controls
only the right input segment in the Power-Set mode.