Specification

PowerMTS 211Si
Process MIG/TIG (DC Only)/Stick
Input Voltage 120/240V Single Phase
Inrush Current 120V: 33A / 240V: 36A
Rated Current 120V: 21A / 240V: 23A
OCV 60V
MIG/TIG/Stick Range 120/240V 120V: 30-150A/10-125A/10-120A
240V: 30-210A/10-210A/10-175A
Wire Spool Size 4” and 8”
Number of Drive Rolls 2
Stock Drive Roll Size .023”-.030”
Synergic Operation MIG only
AC Wave Forms None
Memory 9 Slots
MIG Pulse No
TIG Pulse No
TIG Start Type Lift or High Frequency
E6010/Cellulosic Capability No
Duty Cycle @ Max M/T/S Amps 40%/40%/40%
Gas Inlets 1
Minimum Generator Required 9000W Clean Power Output ≤5% THD Rating
TIG Package Included Yes
Size/Dimensions 17”H X 9”W X 24”L
Weight 60lbs
Recommended Uses Home/Shop/Portable/Farm-Ranch
• 15 Series MIG Torch 10 ft.
• 26 Series TIG Torch 12.5 Ft (35 DINSE-Type Connector)
• Work Clamp 9 ft. (35 DINSE-Type Connector
• Stick Electrode Holder 10 ft.
• Foot Pedal
• Regulator
A Small and Portable Solution.
PowerMTS 211Si
What’s Included
https://www.everlastgenerators.com/product/mig/powermts-211si-tig-package
The PowerMTS 211Si is the perfect combination of size and performance.
With up to 200 Amps of MIG/TIG welding power, and up to 175 Amps of
Stick power, the unit is a perfect, go anywhere multi-process unit. This
unit can be run off of a generator with clean power surge output of just
9000W.
Though the unit is DC only, the unit can tted with an optional spool gun
if aluminum welding is desired. Smooth DC arc performance makes this
unit a great choice for Stainless and Steel welding.
NOVA 17 Rota-Flex 25 ft.
#NVA-17-RF-250-35QD
SM200N Spool-Gun (MTS)
#SM200N-MTS
Recommended Options
GMAW/GTAW/SMAW