Instructions / Assembly

1-800-476-7366
|
[e-mail]
|
WWW.EVERLASTCLIMBING.COM
© 2014 EVERLAST CLIMBING, A PLAYCORE COMPANY
HOME CLIMBING WALL INSTALLATION INSTRUCTIONS
6
B. SINGLE PANEL SUB WALL CONSTRUCTION
1. Working from left to right you will construct the sub wall.
2. Start by taking a 2’’ x 4’’ and lining it up with the stud on the farthest
left. Level the 2’’ x 4’’ and proceed to drill a 5’’ deep hole through the
center hole of the 2’’ x 4’’ and into the stud behind the drywall with
your 5/16’’ drill bit. SEE FIGURE 11a.
3. Using your drill with a 3/8’’ socket attached, take a 3/8’’ lag bolt and
drill it into the hole until snug. Repeat this process on the #2, #3, #4
4. Note layout pattern. SEE FIGURE 11b.
5. Congratulations! Your Sub Wall is complete.
ELECTRIC DRILL
5/16” DRILL BIT
3/8” LAG SCREW
2'' x 4'' x 96''
12 3568910
Fig. 3a
SUB-WALL CONSTRUCTION FIGURE 11a
SUB-WALL CONSTRUCTION FIGURE 11b