Instructions / Assembly

1-800-476-7366
|
[e-mail]
|
WWW.EVERLASTCLIMBING.COM
© 2014 EVERLAST CLIMBING, A PLAYCORE COMPANY
HOME CLIMBING WALL INSTALLATION INSTRUCTIONS
4
ELECTRIC DRILL
5/16” AUGER DRILL BIT
1-1/4” SPADE BIT
Installing Your Wall
A-1. SINGLE PANEL SUB WALL PREPARATION
1. Lay out all of the 2’’ x 4’’ boards on a level
surface.
2. Using the 1-1/4’’ spade drill bit, drill out (3)
1/2’’ deep countersunk holes as shown in.
SEE FIGURE 9a.
3. Using the 5/16’’ auger drill bit, drill out the
center of every countersunk hole you created in
the previous step, as shown in SEE FIGURE 9b
A-2. MULTI-PANEL SUB WALL PREPARATION
1. Lay out all of the 2’’ x 4’’ and 2’’ x 6’’ boards on a
level surface.
2. Using the 1-1/4’’ spade drill bit, drill out (3)
1/2’’ deep countersunk holes as shown in. SEE
FIGURE 9a.
3. Repeat step 2 with 5 holes for 2’’ x 6’’.
4. Using the 5/16’’ auger drill bit, drill out the center
of every countersunk hole you created in the
previous step, as shown in FIGURE 9b.
2'' x 4'' x 96''
2'' x 6''
x
96''
2'' x 4'' x 96''
2'' x
6''
x 96''
6''
6''
48''
CENTER
1-1/4'' ø
1/2'' Deep
6''
21''
21''
21''
2'' x 4'' x 96''
2'' x 6''
x
96''
2'' x 4'' x 96''
2'' x
6''
x 96''
6''
6''
48''
CENTER
1-1/4'' ø
1/2'' Deep
6''
21''
21''
21''
SUB-WALL PREPARATION FIGURE 9a
SUB-WALL PREPARATION FIGURE 9b
X2
X8
X2
X8
SIDE VIEW OF COUNTERSUNK HOLE
SUB-WALL PREPARATION FIGURE 10a
X4
X4
A-1
A-1
A-2
A-2