Specification

D I V ERS I F I ED P R O DUC T S
2/2
EverKem Diversied Products
5180 Indiana Avenue Winston Salem, 27106
PH: 1.800.638.3160 / FX: 1.336.661.7969
www.everkemproducts.com
Application Procedures:
TruSil 100
100 % Acetoxy Silicone Sealant
Technical Data Sheet
1. Clean debris and dry desired area.
2. Cut tip off cartridge. Screw nozzle on end and cut tip to desired bead size. Insert cartridge into standard caulk gun.
3. Hold at 45° angle and apply by pushing sealant ahead of nozzle to achieve a smooth seal. Apply using a steady, even
pressure to completely bridge joints.
4. Complete tooling within 5 minutes. Use dry paper towel to remove excess material. Smooth caulk using wet nger or a
damp cloth for a clean, neat appearance.
5. Sealant normally “skins over” in 5 minutes, dries to touch in 1 hour, and cures & bonds in 24 hours. Allow 7 day cure time
to reach maximum strength.
Application Limitations:
▪ Structural silicone glazing
▪ Joints where physical abuse or abrasion is likely to be encountered
▪ Prolonged water immersions
▪ Porous surfaces, such as masonry
▪ Building materials that might bleed oils, plasticizers, or solvents- materials such as impregnated wood, oil based caulks,
green or partially vulcanized rubber or gasket tapes
▪ Totally conned spaces, as sealant requires atmospheric moisture for cure
Part # Product Description Color Case Quantity
TS-100C TruSil 100 100% Silicone Sealant 10.1 Fl. Oz. Tube Clear 12 tubes/case
TS-100W TruSil 100 100% Silicone Sealant 10.1 Fl. Oz. Tube White 12 tubes/case
TS-100B TruSil 100 100% Silicone Sealant 10.1 Fl. Oz. Tube Black 12 tubes/case
TS-100AL TruSil 100 100% Silicone Sealant 10.1 Fl. Oz. Tube Aluminum 12 tubes/case
TS-100MRC TruSil 100 100% Silicone Sealant 10.1 Fl. Oz. Tube Mildew Resistant Clear 12 tubes/case
TS-100MRW TruSil 100 100% Silicone Sealant 10.1 Fl. Oz. Tube Mildew Resistant White 12 tubes/case
TS-100MRTW TruSil 100 100% Silicone Sealant 10.1 Fl. Oz. Tube Mildew Resistant Translucent White 12 tubes/case
Packaging Options:
Excess caulk should be cleaned from tools and nonporous surfaces while still uncured. On porous surfaces, product should be
allowed to progress through initial set-up, at which time removal is possible via abrasion or other mechanical means.
Clean Up Procedures:
Caution:
Contains Crystalline Silica. Use only with adequate ventilation.
Avoid contact with eyes and skin. Wash hands after using.
Do not transfer contents to other containers for storage.
KEEP OUT OF REACH OF CHILDREN
Scan this QR Code to be directed to our online product
page, where you can view additional information including
Safety Data Sheets and Applicable Testing Documentation
Recommendations for use of this product are based on tests we believe to be reliable. Manufacturer and seller are not responsible for results
where this product is used under conditions beyond our control. If when applied as directed, this material peels, cracks or separates, it will be
replaced without charge upon presentation of proof of purchase and used cartridge. This limited warranty only applies to residential use and
damages including consequential damage and other remedies are excluded. No other warranties apply, including tness for a particular purpose.
Disclaimer: