Installation Guide

Tested to ASTM-E814 / UL-1479
Meets ASTM-E136 Performance Criteria
EcoSeal Standards:
V.O.C. Content: <1 g/l
LEED 2009 (EQ Credit 4.1):
1 point
NAHB Green Guidelines: 5 G.I. Points
Complies To:
Noncombustilble Firestopping Caulk
Technical Data Sheet
Flame guard-814
Product Description:
Standards & Specications:
D I V ERS I F I ED P R O DUC TS
Applications:
SCAQMD Rule #1168
OTC-Ozone Trans. Comm.
CARB
BAAQMD
Product Features
Tested To ASTM-E814
Meets ASTM-E136
UL Classied
Smooth Consistency
Excellent Adhesion
Low V.O.C. (< 1 g/l)
Physical Properties:
1/2
EverKem Diversied Products
5180 Indiana Avenue Winston Salem, 27106
PH: 1.800.638.3160 / FX: 1.336.661.7969
www.everkemproducts.com
▪ Commercial construction
▪ 1 and 2 hour re rated concrete oor and walls
▪ Cables, metal pipes, and open voids
Chemistry Silicate Mortar
Cure Type Water-Based
Color Brick Red
Physical Uncured State Glossy Paste
Physical Cured State Solid Mortar
Shelf Life 12 Months
Tack Free Time 15 Minutes at 75°F
Cure Time 3 to 4 Weeks at 75°F
Flame Spread 0
Smoke Development 0
Freeze - Thaw Stability Excellent - 5 Cycles
Odor Odorless
Weight / Gallon 14 lbs. / gal
V.O.C. Level < 1 gram / liter
Flame Guard-814 is a UL Classied sealant designed
to resume the integrity of 1 & 2 hour re rated oors and
walls when penetrated by plumbing, electrical, and other
mechanical items. In re conditions, Flame Guard-814
forms an effective barrier to prevent the spread of ames,
smoke, and toxic gases. Flame Guard-814 is a one part, non-intumescent, silicate based
sealant that is suitable for adhesion to many substrates. Flame Guard-814 has been tested,
classied, and is approved to be used a ller for “Through-Penetration” restop systems.